"Our #1
Seller in 2009. The VX650 flat out-specs,
out-weighs, out-cuts, out-performs and out-prices the Doosan
DNM650........hands down" Available with CAT40 or CAT50 Spindle
"Texas voters
are more optimistic than the rest of the country about our state's
economy and surviving this national current financial crisis,"
said Buddy Gill, TCUL's chief advocacy officer.....http://www.bizjournals.com/dallas/stories/2009/06/01/daily23.html
Hillary
Machinery Inc Among Top Hyundai-Kia Dealers Honored in South Korea
Hillary Machinery Inc was among
the top dealers in North, Central, and South America invited to a VIP
meeting at the Hyundai-Kia Machine factory in Changwon, South Korea.
The meeting was mutli-fold. First, to honor the top dealers, the
group was flown to the resort Island of Jeju for golf, tennis,
hiking, and island exhibits and boat tours.
The second phase of the trip was
to tour the Changwon factory, meet with the Hyundai-Kia Machine
engineering staff and evaluate new products. The last leg of the trip
included a tour of a Hyundai motor plant in Asan where the Sonata and
Granduer are assembled with the last night in South Korea spent in Seoul.
Hillary
Machinery Inc Presents to North, Central, and South American
Hyundai-Kia Dealers and Engineers in South Korea
Troy Owen, VP
Sales & Marketing for Hillary Machinery Inc spoke on behalf of
the North, Central, and South American Hyundai-Kia Machine dealers at
the welcome dinner during a recent trip to South Korea. The purpose
of the meeting was to convey to Hyundai-Kia Machine management and
engineers the competitive challenges facing dealers and to make
suggestions on how the dealer network might help Hyundai-Kia Machine
continue to increase it's global ranking in the machine tool market.
Hyundai-Kia Machine was the fastest growing machine tool builder in
2008 in North America. Hyundai-Kia Machine's goal is to be a top 10
machine tool builder by 2010 and in the top 5 by 2020.
Get $20K For
Your Used Fadal
For a limited
time, whether it's running or not, get as much as $20K in trade value
or cash back for your Fadal VMC when you purchase a new Hyundai-Kia
VX Series VMC. Call Hillary Machinery Inc or your sales engineer for
details at (800)683-1516. Other trades considered.
VX400
31" X Axis
VX500
42" X Axis
VX650
55" X Axis
VX750
61" X Axis
VX950
96" X Axis
This promotion excludes all other offers.
FADAL SUPPORT
As many of you
already know, Fadal is consolidating their operations with their
parent company (MAG Industrial Automation Systems). As a result, the
Fadal control and most of the Fadal models will be discontinued
indefinitely. Please be assured that together with MAG, Hillary
Machinery Inc is committed to supporting your Fadal with service and
replacement parts as along as it's in service.
While They
Last, Get Double the
Discounts on Remaining Inventory
As a result of the economic
downturn, building out the inventory, relocation to the Giddings &
Lewis facility in Fon Du Lac, remaining inventory prices have been
cut as much as 30%.
2216's
(22"x16"x20") from $39,900
3016's
(30" x 16" x 20") from $44,900
4020's
(40"x20"x20") from $55,900
4525's
(45" x 25" x 24") from $83,900
6030's
(60" x 30" x 30") from
$99,000
6535 HTX
CAT50 (65" x 35" x 34") from $133,000
Final Prices
Determined by Actual Option Content
Machines
In Stock Include
VMC2216FX
with Fanuc Oi w rigid tap, All
Box
Way,
21 pocket ATC, 20HP,
8K spindle for $39,900
VMC3016FX
with Fanuc Oi w rigid tap, All
Box
Way,
21 pocket ATC, 20HP,
10K
spindle for $44,900
VMC4020FX
with Fanuc 0i and rigid tap, All
Box Way ,21
pocket
ATC, 22HP,
10K spindle, and through spindle coolant for $65,000
VMC6030
with Fanuc 18iMB5 and rigid tap, All Box Way , 24 Arm Type ATC, 22HP,
10K, and through spindle coolant for $99,500
Show Demos /
Overstocks Marked to Sell in May/June
2005
Hyundai-Kia SKT250MS
Turn / Mill Center
w/ Sub-Spindle
2009 List $167,900
2005
Model $85,000 w/ 6 Month Parts/Labor Warranty
This 2005 model
has been a dealer / customer demo making appearances at Westec,
Eastec, regional tool shows, and open houses throughout the country.
Although this model displays the older color scheme, it is factory
guaranteed, fully functional, has very low hours, and sells with a 6
month factory parts and labor warranty set up and operator training
at the customer's facility.
Standard Equipment
Rugged Box Bed
Design with Solid Box Ways
Separate Large
Capacity Coolant Tank for Easy Cleaning
30HP 3,500rpm Main
Spindle with 3" Bar Capacity and full C Axis
11HP 4,000rpm Sub
spindle with 2.5" Bar Capacity and full C Axis
10" Big Bore
Chuck (Main Spindle); 8" Chuck (Sub-Spindle)
12 Position BMT65
Live Servo Turret with 2 Axial / 2 Radial Live Tool Holders
Tool-Setter; Bar
Feeder Interface; Sub-Spindle Parts Catcher
10” Chuck
with 2.6” Bar Cap., 30.7” Swing, 10” Turning Diameter,
20.9” Turning length, 15HP, 4,000 RPM, 1,417 IPM Rapid Traverse,
Fanuc OiTC Control
2009 List - $61.900
2006
OVERSTOCK PRICE $34,900
6 Month Factory
Parts / Labor Warranty
CASH TERMS – 80% DOWN NET15
"SHOW DEMO"
SKT 300MS
Turn Mill w/Sub-Spindle
250MS Shown Above
Rugged Box Bed
Design with Solid Box Ways, Separate Large Capacity Coolant Tank for
Easy Cleaning, 30HP 3,500rpm Main Spindle with 3" Bar Capacity
and full C Axis,11HP 4,000rpm Sub spindle with 2.5" Bar Capacity
and full C Axis, 10" Big Bore Chuck (Main Spindle); 29.5"
MAX Swing, 19.7" MAX Turning Diameter, 26" MAX Turning
Length, 8" Chuck (Sub-Spindle), 12 Position BMT65 Live Servo
Turret with 2 Axial / 2 Radial Live Tool Holders, Tool-Setter; Bar
Feeder Interface; Sub-Spindle Parts Catcher, 787/945ipm rapid
traverse (X/Z), Fanuc 18i CNC Controller Download
PDF
2009 List - $187,500
$145,000
(Includes Chip Conveyor)
FOB: Fort Worth
2006 OVERSTOCK
SKT100M 6" Chucker with Live Tools
(Still In The Box)
45 Degree Slant
Bed, 6.7” Chuck with 1.73” Bar Cap., 21.7” Swing,
13.8” Turning Diameter, 11.8” Turning length, 10HP, 6,000
RPM, 12 Position VDI30 Live Turret with 5HP 4,500 RPM Milling, 1,417
IPM Rapid Traverse, Fanuc OiTC Control
All Box Way,
61" x 29.5" x 28.3" Travels, 70.9" x 27.6"
Table, 25 HP, 8,000 RPM Geared Head, 30 Pocket Side Mount ATC, 430
PSI Through Spindle Coolant, Internal Chip Augers, External Chip
Conveyor, Fanuc 18i, Download
PDF
2009 List - $195,000
$162,000
FOB: Fort Worth
OVERSTOCKED
VERTICAL TURNING CENTERS
2006 OVERSTOCK
SKT5V 15” Chuck Vertical Turning Center
15” Chuck (Upgradeable to
18”), 31.54” Swing, 21.7 Turning Diameter, 23’6”
Turning Length, 40HP, 2000 RPM A2-11 Spindle, 8 or 12 Position
Bi-Directional Turret, 787 MAX IPM Rapid Traverse, Tool Pre-Setter,
Fanuc OiTC Control
2009 List - $131,450
2006
OVERSTOCK PRICE $76,900
6 Month Factory Parts / Labor Warranty
CASH TERMS – 80% DOWN NET15
CUSTOMER IN THE SPOTLIGHT
Hillary Machinery
Inc has been a proud supplier to Ameriforge over the past several years.
Ameriforge is Hyundai-Kia's
largest customer in South Texas with 11 machines to date.
Among Ameriforge's
diverse assortment of CNC machines, Hillary has been the proud
supplier of
Ameriforge is a manufacturer of
forged products dedicated to growing with selected customers and
suppliers through collaboration in process and technical innovation
applied to global markets. Major markets served include aerospace,
power generation, oil & gas transportation, and industrial.
Ameriforge leads the industry in
product design and engineering, open and closed die forging, and ring
rolling for all of your critical application needs, utilizing a wide
array of steel and aluminum materials, including:
