© Copyright Hillary Machinery Inc 2017
Made with Xara
hangsterfer metalworking fluids and lubricants hangsterfer's metalworking fluids and lubricants hangsterfer's metalworking fluids and lubricants hangsterfer's metalworking fluids and lubricants hangsterfer's metalworking fluids and lubricants
Energy
General Applications
Aerospace
Aerospace Approvals
Swiss
hangsterfer's metalworking fluids and lubricants
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS)
Grinding
hangsterfer's metalworking fluids and lubricants
Our bio-stable technology has evolved from the high quality emulsifiable oils (high oil content) into semi-synthetic (low oil content) and full synthetics (no oil content). Hangsterfer’s only uses highly refined, ultra-pure ingredients. All of Hangsterfer’s coolant concentrates are formulated with advanced technologies, which utilize synthetic, vegetable and petroleum components. Emulsifiable Oils - S-500CF® The first choice for general machining of all metals. Due to its extreme pressure (EP) properties, outstanding results have been generated on all metals, including nickel alloys, stainless steels and aluminum alloys. Our CF version is chlorine free with specially formulated anti-weld and anti-wear compounds for use on ferrous and non-ferrous metals especially aluminum alloys.   Missile Lube ® 5 EH Chlorine-free, vegetable oil based coolant. Provides excellent lubricity, surface finishes and tool life. Especially good for aluminum, steel, Stainless Steel and other difficult to machine materials. Semi-Synthetic - Hangsterfer’s S-787 is a chlorine-free vegetable based semi-synthetic that represents the Next Generation® in technology. The unique characteristics of S-787 allow for excellent results high-pressure applications with exotic aerospace and medical alloys. The natural translucent formula provides good work piece visibility, very low consumption, and often reduces coolant consumption by more than 20%!   S-747 is a time tested and proven vegetable-based technology from Hangsterfer’s Laboratories. The unique lubricity characteristics of S-747 allow for manufacturing of ferrous to non-ferrous material including exotic alloys. The low hydrocarbon formula utilizes special vegetable derived ingredients to achieve outstanding results in a wide variety of applications. Synthetic - Crystal Cut® 322 is a Boeing approved full synthetic, which is excellent for machining and grinding of all materials, especially aerospace materials. Crystal Cut 322 is based on Alternative and Renewable Resources, and its unique formulation significantly eases the cutting process and also provides excellent corrosion and rust protection reducing oxidation of the freshly cut surfaces.   R-100 is an excellent grinding synthetic, especially useful in Blanchard grinders and deburring tumblers. Hangsterfer’s R-100 is a full synthetic machining and grinding coolant. The transparent biostable formula offers extended sump life, reduced coolant consumption and minimal waste. R-100 is free of oil and grease while remaining transparent in both hard and soft water. It provides a unique cleaning action to help reduce wheel loading and leaves behind a thin corrosion inhibiting film.

Hangsterfer’s Metalworking Fluids

OSHA-GHS Compliant Coolant Concentrates, Oils, Compounds and Lubricants

Coolant Concentrates

hangsterfer's metalworking fluids and lubricants

Cutting Oils

Hangsterfer’s cutting oils are recognized by Swiss-Style screw machine manufacturers around the world. Hard-Cut ® has improved tool life and surface qualities by as much as 300%. In addition to the lubricity provided at the cutting zone, our cutting oils provide excellent lubrication for the machine’s slides, guide bushings, bearings, and spindles. Hangsterfer’s Next Generation® (NG) Series is formulated with the industry’s safest chlorinated extreme pressure additives, and our Missile Lube ® series is both chlorine and sulfur free. Hard-Cut® - The Hard-Cut ® series is recognized as the ultimate in high quality cutting oils. Hard-Cuts are intended to make the hardest applications easier and more profitable by improving part quality and by reducing tooling costs. Hard-Cut 5418, an outstanding all-around cutting oil, can be used in Swiss- Style automatics, milling machines or light stamping. Hard-Cut NG is the Next Generation® of Hard- Cuts and contains an infused combination of synthetic and vegetable compounds and derivatives. Delivers extreme pressure and anti-wear additives to the tool work-piece interface without compromise to other features that you expect.   Missile Lube® - Hangsterfer’s Missile Lube series includes high quality, high performance, chlorine and sulfur free oils. The combination of synthetic and vegetable based technologies increases tool life and improves surface finishes for a variety of metalworking operations. Composed of highly refined raw materials, the Missile Lube series helps keep the machine clean and minimizes operator exposure to mist and smoke. The non-toxic and non-corrosive blend is designed for easy waste disposal and operator safety.   CC® Series - Hangsterfer’s CC 22 and CC 442 oils are designed for light and medium duty metalcutting and metalforming operations. These economically formulated oils are manufactured under the same quality control standards set for all Hangsterfer’s products. Offering superior lubrication for the machine tool as well as the cutting and forming operations. CC oils provide benefits in productivity, equipment life and environmental compliance. Grinding Oils - Our Grinding Oil series is compatible with all types of grinding wheels, and can be used for grinding high-speed steel, cobalt, carbide, ceramics and hardened steel. Unique advanced synthetic and natural lubricity additives in Grinding Oil help keep your grinding wheels clean, help maintain part integrity, and produce a great surface finish.   PC Series - Hangsterfer’s PC series is based on advanced Very High Flash Point (VHF) chemistry and Polar Cutting (PC) Technology. As speeds and feeds are maximized, the temperature in the work piece zone is ever increasing. As a result, the VHF characteristics are well sought after because of their higher flash point. The PC series not only lubricates the tool, but equally lubricates the metal being cut, creating metal flow conditions that were previously unattainable with traditional technologies.   Tapping & Misting - SuperAllTap ®, recognized as the ultimate in high quality tapping compounds, is a heavy-duty compound used for severe thread cutting and thread forming operations. Offering superior lubrication for the tool provides benefits in productivity and tool life. The non-toxic formulation is designed for operator safety. Due to its ability to emulsify into water, SuperAllTap is excellent for machines using coolants since it will easily wash off into the coolant system.

Dielectric Fluid

Our dielectric fluids have allowed our users with EDM machines to increase amperage, thus reducing process times by as much as 30%. Also, they create a non-conductive channel allowing the spark to hit its target accurately and at a full charge. It has the added benefit of reduced carbonization, which reduces gummy residue.  Crystal Brite ® EDM has been proven successful in both high and low amperage spark erosion processes. Its unique blend of low viscosity ultra-pure hydrocarbons with the latest synthetic technology provides a crystal clear fluid with high oxidation stability and extremely low viscosity. The result is stability under high amperage as well as fast flushing in tight tolerance finishing work.  Crystal Brite EDM is safe, operator friendly and odorless. It contains no solvent-based hydrocarbons. This helps eliminate skin irritation associated with solvents and reduces oil mist and solvent vapor exposure.  The combination of low viscosity and low specific gravity produces faster more efficient flushing and filtration resulting in increased metal removal rates by as much as 30%. Filtration is improved due to less carbon and residue formation. The filter lasts longer and particulates are prevented from returning to the electrode work piece interface.

Machine Lubricants

In the early 1980s, Hangsterfer’s developed “coolant compatible” machine lubricants that do not cause negative coolant effects such as odor, staining and dermatitis. Our unique “coolant compatible” formulations allows the oil to remain on the sliding surface in a completely fluid-like state, thus protecting the surface more effectively than old technology. Water is repelled which improves lubrication and prevents corrosion.   Way Oil - The full range of Hangsterfer’s Way Oils offer superior slideway adherence, stick-slip friction characteristics and complete water soluble coolant separation. Way Oil 2 is formulated with high quality additives, resulting in products that meet or exceed international specifications established for slideway oils. By separating quickly and completely from your water soluble coolant, you will achieve the maximum in cutting performance and sump life. In addition, because they minimize water solubility, they are less likely to be prematurely washed off the ways. The Way Oil series is available in 5 viscosities that meet the International Standards Organization (ISO) viscosity requirements for machine lubricants.   Spindle & Hydraulic (Antiwear) - The Antiwear 32 and Antiwear 100 products are dual-purpose machine lubricants formulated for both hydraulic and spindle lubrication. The dual-purpose formulation eliminates the need to inventory both hydraulic and spindle oils. The primary benefit of the Antiwear series is the fact that they do not emulsify in water and as a result will reject from coolant faster than lower quality products. Faster rejection means easier removal of tramp oil from the coolant by means of decantation, skimming, coalescing and centrifuging.
STOCKED IN PLANO, TEXAS - DELIVERY AVAILABLE
SALE!   Workholding   Workholding Automation   Automation  
Hillary Machinery
World Class CNC Solutions Since 1984
877-902-3751
© Copyright Hillary Machinery Inc 2017
Made with Xara
Hillary Machinery World Class CNC Solutions Since 1984
Energy
General Applications
Aerospace
Aerospace Approvals
Swiss
Grinding
Hangsterfer’s Metalworking Fluids

Coolant Concentrates

Cutting Oils

Dielectric Fluid

Machine Lubricants

STOCKED IN PLANO, TEXAS DELIVERY AVAILABLE
SALE!   Workholding   Workholding Automation   Automation  
PRODUCT MENU PRODUCT MENU
CUTTING FLUIDS CUTTING FLUIDS CUTTING FLUIDS