© Copyright Hillary Machinery Inc 2017
Made with Xara
hillary machinery cnc machine tool dealer
Hillary Machinery World Class CNC Solutions Since 1984
SALE!
Revision 050218 These   terms   and   conditions   govern   the   sale   of   CNC   machine   tool   Products   and/or   Services   (“Product   and/or   Service”)   provided   by   Hillary   Machinery   (HMI)   and   its affiliates   (“Seller”)   as   well   as   by   third   party   vendors,   manufacturers   and/or   service   providers   of   Seller   as   listed   and   described   in   the   Order   (“Orders,   Sales   Order,   Sales Order   Acknowledgement,   Quote,   Proposal,   Invoice”)   including   but   not   limited   to   any   accessories,   services,   transportation,   and/or   rigging   if   so   included   in   the   Order   of machine   tool   Products.   These   terms   and   conditions   (“Agreement”)   take   precedence   over   Buyer’s   (“Buyer,   Customer   or   Purchaser”)   supplemental   or   conflicting   terms and   conditions   to   which   notice   of   objection   is   hereby   given.   Neither   Seller’s   commencement   of   performance   or   delivery   shall   be   deemed   or   construed   as   acceptance   of Buyer’s   supplemental   or   conflicting   terms   and   conditions.   HMI’s   failure   to   object   to   conflicting   or   additional   terms   will   not   change   or   add   to   the   terms   of   this   agreement. Buyer’s acceptance of the Products and/or Services from Seller shall be deemed to constitute acceptance of the terms and conditions contained herein. 1. Orders:   All   Orders   placed   by   Buyer   are   subject   to   acceptance   by   Seller.      Orders   may   not   be   canceled   or   rescheduled   without   HMI’s   written   consent.   All   Orders must   identify   the   Products,   unit   quantities,   part   numbers,   estimated   delivery,   and   applicable   prices   of   the   Products   being   purchased.   Unless   otherwise   noted   in   the Order,   all   items   will   be   shipped   when   manufacturing   is   complete   and/or   domestically   available   to   ship.   Seller   may   at   its   sole   discretion   re-allocate   Product   among   its customers to meet delivery expectations, assuming those Products are functionally identical. 2. Prices: The   final   prices   of   the   Products   are   those   prices   specified   in   the   Invoice.   Pricing   for   undelivered   Products   may   be   increased   (or   decreased)   in   the   event   of an   increase   (or   decrease)   in   Seller’s   cost,   change   in   market   conditions,   prior   sale,   or   any   other   causes   beyond   the   Seller’s   reasonable   control   and   upon   written notification to Buyer. Unless otherwise noted in Order, prices shall automatically expire in thirty (30) days from the date of same. 3. Taxes:   Unless   otherwise   agreed   to   in   writing   by   Seller,   all   prices   quoted   are   exclusive   of   transportation   and   insurance   costs,   duties,   and   all   taxes   including federal,   state   and   local   sales,   excise   and   value   added,   goods   and   services   taxes,   and   any   other   taxes.   Buyer   agrees   to   indemnify   and   hold   Seller   harmless   for   any liability   for   tax   in   connection   with   the   sale,   as   well   as   the   collection   or   withholding   thereof,   including   penalties   and   interest   thereon.   When   applicable,   transportation   and taxes shall appear as separate items on Seller’s invoice. 4. Payment:   Payment   may   be   made   by   check,   money   order,   or   bank   wire   (all   fees   are   borne   by   the   Buyer).   Unless   Order   states   otherwise,   where   Seller   has extended   credit   to   Buyer,   terms   of   payment   require   20%   (of   Order   total)   in   advance   from   Buyer   at   time   of   purchase   with   remaining   balance   of   Order   paid   by   Buyer   no later   than   thirty   (30)   days   from   date   of   the   Order’s   shipment   (or   completion   date   of   Service   performed),   without   offset   or   deduction.   On   any   past   due   invoice,   Seller   may impose   interest   at   the   rate   of   one   and   one-half   percent   [1.5%]   per   month.      If   Buyer   fails   to   make   payment   when   it   is   due,   Seller   reserves   the   right   to   interrupt   service, change   or   withdraw   credit   and   thereby   suspend   or   cancel   performance   under   any   or   all   purchase   orders   or   agreements   in   which   Seller   has   extended   credit   to   Buyer   and recover   in   its   entirety,   all   Products   described   in   Order   delivered.      In   the   event   of   default   by   Buyer,   Seller   shall   be   entitled   to   costs,   fees,   and   expenses,   including   but   not limited to recovery of attorney fees, court costs and fees, and collections costs. 5. Shipment,   Delivery,   Acceptance   and   Title:   Shipment   occurs   when   the   Product   is   loaded   and   released   to   the   carrier   at   shipping   point.      The   Product’s   arrival   (or any   portion   thereof)   on-board   the   carrier   at   the   Buyer’s   ‘Ship   To’   address   described   in   the   Order,   constitutes   Delivery.      Any   utilization   of   the   Product   by   the   Buyer including,   but   not   limited   to   powering   on,   setting   up,   installing   tooling,   and/or   programming,   constitutes Acceptance.   Title   and   risk   of   loss   pass   to   the   Buyer   upon   loading and   release   of   the   Product   to   the   carrier.      Deliveries   will   be   made   “FOB   USA   Shipping   Point”   or   Free   On-Board   from   point   of   USA   based   shipment.      Seller’s   delivery dates   are   estimates   only   and   Seller   is   not   liable   for   delays   in   delivery   or   for   failure   to   perform   due   to   causes   beyond   the   reasonable   control   of   the   Seller,   nor   shall   the carrier   be   deemed   an   agent   of   the   Seller.      Physical   delivery   of   any   line   item,   component,   or   portion   of   the   order   constitutes   delivery   of   same   and   is   therefore   subject   to payment   terms   described   in   paragraph   4.     A   delayed   delivery   of   any   part   of   an   Order   does   not   entitle   Buyer   to   withhold   payment   of   entire   order,   nor   does   it   entitle   buyer to   cancel   the   Order   or   any   portion   of   the   Order.      Buyer   may   elect   to   withhold   payment   on   any   undelivered   line   item,   component,   or   portion   of   the   Order   with   Seller’s written consent. 6. Returns, Refunds and Exchanges: Returns: Only   products   originally   shipped   from   HMI   or   from   an   authorized   supplier   (drop-ship)   will   be   considered   for   return   to   HMI.   By   a   Customer   requesting   return   of   products to   HMI,   the   Customer   certifies   that   the   products   were   purchased   from   HMI   and   there   has   been   no   substitution   of   the   product   from   another   supplier,   distributor   or   other source   of   the   product.   Any   return   must   be   in   the   original   packaging   and   in   unused   condition   except   if   approved   for   failure   analysis/warranty   evaluation   by   HMI   via   a Return Material Authorization (RMA). Return Freight / Restocking Fee: HMI   reserves   the   right   to   charge   cancellation   and   restocking   fees,   at   a   minimum   rate   of   15%   to   be   deducted   from   the   Customer   refund.   HMI   does   not   refund   the   original shipping   and   rigging   if   part   of   the   original   Order.      Customer   is   responsible   for   all   rigging   and   return   freight   charges.   HMI   does   not   accept   COD   shipments.     Any   deposit paid to HMI by Buyer may be deemed non-refundable to Buyer. Refunds: Upon   receipt   and   inspection   of   returned   item(s),   HMI   will   advise   of   the   refund   status.   In   the   case   of   factory   warranty   or   failure   analysis,   HMI   will   issue   any   applicable credit pending manufacturer confirmation of failure. HMI initiates credits via the original method of payment within 48 hours of approval. 7. Limited   Warranty:   Final   commissioning   and   warranty   activation   of   the   Product   requires   that   the   Machine   Installation   Record   (MIR)   be   submitted   and   accepted   by the   Seller   and/or   Seller’s   affiliates   to   obtain   a   Permanent   Operation   Code   (POC),   if   the   Product   is   so   equipped.   The   Seller   and/or   Seller’s   affiliates   reserve   the   right   to withhold POC if Payment obligations are not met, which may render Product temporarily inoperable.  Unless   otherwise   stated   in   Order   Seller   warrants   to   the   original   purchaser,   other   than   a   purchaser   for   resale,   that   Seller’s   machine   tools   shall   be   free   of   defects   in materials   and   workmanship.   For   a   period   of   one   (1)   year   from   completion   of   installation,   or   for   a   period   of   fifteen   (15)   months   from   date   of   shipment,   whichever   is   earlier.     Seller will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser. All   warranty   repairs   must   either   be   performed   by   or   authorized   by   a   Seller.      To   obtain   warranty   service,   Purchaser   must   contact   the   Seller.      Purchaser   must   provide verification   of   the   date   of   delivery/installation   when   requesting   warranty   service   (dated   installation   report,   MIR).      Ground   freight   charges   (UPS   regular   or   common   carrier truck)   for   all   warranty   replacement   parts   are   paid   by   Seller.      If   machine   is   not   operational,   the   Seller   will   pay   next   -   day   air   shipment   charges   for   necessary   parts weighing   100   lbs.   or   less.   Materials   or   parts   alleged   to   be   defective   shall   be   returned   to   Seller,   at   Seller’s   request,   transportation   charges   prepaid.      After   the   warranty repair   or   replacement   of   a   defective   part,   Seller   warranty   for   such   part   shall   continue   for   ninety   (90)   days   or   for   the   remainder   of   the   original   Limited   Warranty,   whichever is longer.  WARRANTY LIMITATIONS This   warranty   shall   remain   in   effect   only   if   the   machine   is   used   and   maintained   in   accordance   with   all   operating   and   maintenance   instructions   set   forth   in   the   manuals and   instruction   sheets   furnished   by   the   Seller.      The   Seller   shall   have   no   liability   to   initiate   or   continue   to   service   or   support   the   Product   if   the   Purchaser   has   not   fulfilled its   Payment   obligations   (see   Paragraph   #4).      Buyer   is   hereby   No   allowance   will   be   made   for   repairs   or   alterations   made   without   Seller’s   prior   written   consent   or approval.  The limited warranty provided by Seller excludes the following: 1. Damage, malfunction, or failure caused by or resulting from improper maintenance, misuse, neglect, accident or any other cause beyond the control of the Seller. 2. Damage, malfunction, or failure caused by modification of the machine (mechanical or electrical) Without written authorization by Seller. 3. Damage, malfunction or failure caused by installation or use of accessories or peripherals not purchased through or authorized in writing by Seller. 4. Paint, batteries, filters, fluids, fuses, light bulbs, or any commonly expendable item. 5. Damage to machines and/or components while being transported from Seller’s warehouse or facility to destination. 6. Accessories or peripherals not manufactured by Seller, which shall be subject only to whatever warranty that is supplied by the manufacturer of such product. 7. Fanuc CNC control, Fanuc spindle motors and Fanuc servo motors, spindle and servo drives, which are covered by a two (2) year manufacturer warranty. No   person,   agent,   distributor,   dealer   or   company   is   authorized   to   change,   modify   or   amend   the   terms   of   this   Limited   Warranty   in   any   manner.   Seller   makes   no warranties,   guarantees   or   representations,   express   or   implied   with   respect   to   the   machine   tool,   or   parts   thereof,   except   to   the   extent   such   warranty   is   set   forth   herein. The equipment covered does not necessarily comply with any codes or standards unless specifically quoted, ordered, and so accepted. THIS   WARRANTY   IS   IN   LIEU   OF ALL   OTHER   WARRANTIES,   EXPRESS   OR   IMPLIED,   INCLUDING   WITHOUT   LIMITATION   WARRANTIES   OF   MERCHANTABILITY OR   FITNESS   FOR ANY   USE   OR   PURPOSE.      HWMA’s   LIABILITY   UNDER   THIS   WARRANTY   IS   EXPRESSLY   LIMITED   TO   ITS   PROMISE   TO   REPAIR   OR   REPLACE THE DEFECTIVE GOODS. HWMA SHALL HAVE NO FURTHER LIABILITY IN CONTRACT OR NEGLIGENCE 8. Limitation    of    Liabilities:    BUYER    SHALL    NOT    BE    ENTITLED    TO,   AND    SELLER    SHALL    NOT    BE    LIABLE    FOR,    LOSS    OF    PROFITS    OR    REVENUE, PROMOTIONAL    OR    MANUFACTURING    EXPENSES,    OVERHEADS,    BUSINESS    INTERRUPTION    COST,    LOSS    OF    DATA,    REMOVAL    OR    REINSTALLATION COSTS,   INJURY   TO   REPUTATION   OR   LOSS   OF   BUYERS,   PUNITIVE   DAMAGES,   IPR   INFRINGEMENT,   LOSS   OF   CONTRACTS   OR   ORDERS   OR ANY   INDIRECT, SPECIAL,   INCIDENTAL   OR   CONSEQUENTIAL   DAMAGES   OF   ANY   NATURE.   BUYER’S   RECOVERY   FROM   SELLER   FOR   ANY   CLAIM   SHALL   NOT   EXCEED   THE PURCHASE   PRICE   PAID   FOR THE AFFECTED   PRODUCTS   IRRESPECTIVE   OF THE   NATURE   OF THE   CLAIM   WHETHER   IN   CONTRACT, TORT,   WARRANTY,   OR OTHERWISE.   BUYER   WILL   INDEMNIFY,   DEFEND AND   HOLD   SELLER   HARMLESS   FROM ANY   CLAIMS   BASED   ON   (a)   SELLER’S   COMPLIANCE   WITH   BUYER’S DESIGNS,   SPECIFICATIONS,   OR   INSTRUCTIONS,   (b)   MODIFICATION   OF   ANY   PRODUCTS   BY   ANYONE   OTHER   THAN   SELLER,   or   (c)   USE   IN   COMBINATION WITH OTHER PRODUCTS. 9. Export   Control:   Buyer   certifies   that   it   will   be   the   recipient   of   the   Products   to   be   delivered   by   Seller.   Buyer   understands   that   the   associated   hardware,   software, and/or technical data (“products”)   listed   on   their   Purchase   Order   includes   items   that   are   governed   by   the   U.S.   Export Administration   Regulations   (“EAR”),   by   the   U.S.   Foreign Assets   Control Regulations   (“OFAC”)   and   the   International   Traffic   in   Arms   Regulations   (“ITAR”).   The   Buyer   understands   that   its   sale   or   distribution   of   said   products   may   constitute exports   or   re-exports,   and   as   such,   must   be   in   accordance   with   the   requirements   administered   by   Bureau   of   Industry   and   Security,   Department   of   Treasury,   and Department   of   State.   It   is   understood   that   the   country   of   ultimate   destination,   commodity   classification,   end-user,   or   end-use   for   any   said   products,   could   affect   the applicable   license   requirements   and   exportability.   The   Buyer   agrees   to   consult   various   resources,   such   as   the   EAR,   ITAR,   and   OFAC,   by   the   U.S.   Department   of Commerce’s   Bureau   of   Industry   and   Security’s   (“BIS”)   Export   Counseling   Division,   and   other   appropriate   Government   Sources   to   ensure   that   the   sales   and   distribution of   said   products,   is   processed   in   accordance   with   all   applicable   laws.   The   Seller   will   not   transfer   any   export-controlled   products   to   a   “non-U.S.   Person”   without   the proper authority of the United States Government, and the buyer’s written approval. 10. Use   of   Products:   Unless   otherwise   noted,   Products   sold   by   Seller   are   not   designed,   intended   or   authorized   for   use   in   life   support,   life   sustaining,   nuclear,   or   other applications   in   which   the   failure   of   such   Products   could   reasonably   be   expected   to   result   in   personal   injury,   loss   of   life   or   catastrophic   property   damage.   If   Buyer   uses   or sells   the   Products   for   use   in   any   such   applications:   (1)   Buyer   acknowledges   that   such   use   or   sale   is   at   Buyer’s   sole   risk;   (2)   Buyer   agrees   that   Seller   and   the manufacturer   of   the   Products   are   not   liable,   in   whole   or   in      part,      for   any   claim   or   damage   arising   from   such      use;      and      (3)      Buyer   agrees   to   indemnify,   defend   and   hold Seller   and   the   manufacturer   of   the   Products   harmless   from   and   against   any   and   all   claims,   damages,   losses,   costs,   expenses   and   liabilities   arising   out   of   or   in connection with such use or sale. 11. Force   Majeure:   Seller   is   not   liable   for   failure   to   fulfill   its   obligations   for   any   accepted   Order   or   for   delays   in   delivery   due   to   causes   beyond   Seller’s   reasonable control   including,   but   not   limited   to,   acts   of   God,   natural   or   artificial   disaster,   riot,   war,   strike,   delay   by   carrier,   shortage   of   Product,   acts   or   omissions   of   other   parties,   acts or   omissions   of   civil   or   military   authority,   Government   priorities,   changes   in   law,   material   shortages,   fire,   strikes,   floods,   epidemics,   quarantine   restrictions,   acts   of terrorism,   delays   in   transportation   or   inability   to   obtain   labor,   materials   or   Products   through   its   regular   sources,   which   shall   be   considered   as   an   event   of   force   majeure excusing   Seller   from   performance   and   barring   remedies   for   non-performance.   In      an   event   of   force   majeure   condition,   the   Seller’s   time   for   performance   shall   be extended   for   a   period   equal   to   the   time   lost   as   a   consequence   of   the   force   majeure   condition   without   subjecting   Seller   to   any   liability   or   penalty.   Seller   may,   at   its   option, cancel the remaining performance, without any liability or penalty, by giving notice of such cancellation to the Buyer. 12. Technical   Assistance   or   Advice:   If   technical   assistance   or   advice   is   offered   or   given   to   Buyer   free   of   charge,   Seller   shall   not   be   held   liable   for   the   content   or Buyer’s   use   of   such   technical   assistance   or   advice   nor   shall   any   statement   made   by   any   of   Seller’s   representatives   in   connection   with   the   Products   or   Services constitute a representation or warranty, express or implied. 13. General:   (a) The   laws   of   the   State   to   where   the   Product   is   shipped   and   installed,   will   exclusively   govern   any   dispute   between   Seller   and   Buyer,   (b)   Buyer   may   not assign   this Agreement   without   the   prior   written   consent   of   Seller.   Seller   or   its   affiliates   may   perform   the   obligations   under   this Agreement.   This Agreement   is   binding   on successor   and   assigns,   (c)   Products,   including   software   or   other   intellectual   property,   are   subject   to   any   applicable   rights   of   third   parties,   such   as   patents,   copyrights and/or user licenses.

Hillary Machinery Standard Terms and Conditions of Sale

© Copyright Hillary Machinery Inc 2017
Made with Xara
hillary machinery logo
Hillary Machinery World Class CNC Solutions Since 1984
SALE!
Revision 050218 These   terms   and   conditions   govern   the   sale   of   CNC   machine   tool   Products   and/or Services   (“Product   and/or   Service”)   provided   by   Hillary   Machinery   Inc   (HMI)   and   its affiliates   (“Seller”)   as   well   as   by   third   party   vendors,   manufacturers   and/or   service providers   of   Seller   as   listed   and   described   in   the   Order   (“Orders,   Sales   Order,   Sales Order   Acknowledgement,   Quote,   Proposal,   Invoice”)   including   but   not   limited   to   any accessories,   services,   transportation,   and/or   rigging   if   so   included   in   the   Order   of machine   tool   Products.   These   terms   and   conditions   (“Agreement”)   take   precedence over   Buyer’s   (“Buyer,   Customer   or   Purchaser”)   supplemental   or   conflicting   terms   and conditions     to     which     notice     of     objection     is     hereby     given.     Neither     Seller’s commencement    of    performance    or    delivery    shall    be    deemed    or    construed    as acceptance   of   Buyer’s   supplemental   or   conflicting   terms   and   conditions.   HMI’s   failure to   object   to   conflicting   or   additional   terms   will   not   change   or   add   to   the   terms   of   this agreement.   Buyer’s   acceptance   of   the   Products   and/or   Services   from   Seller   shall   be deemed to constitute acceptance of the terms and conditions contained herein. 1. Orders: All   Orders   placed   by   Buyer   are   subject   to   acceptance   by   Seller.      Orders may   not   be   canceled   or   rescheduled   without   HMI’s   written   consent.   All   Orders   must identify   the   Products,   unit   quantities,   part   numbers,   estimated   delivery,   and   applicable prices   of   the   Products   being   purchased.   Unless   otherwise   noted   in   the   Order,   all   items will   be   shipped   when   manufacturing   is   complete   and/or   domestically   available   to   ship. Seller   may   at   its   sole   discretion   re-allocate   Product   among   its   customers   to   meet delivery expectations, assuming those Products are functionally identical. 2. Prices: The   final   prices   of   the   Products   are   those   prices   specified   in   the   Invoice. Pricing   for   undelivered   Products   may   be   increased   (or   decreased)   in   the   event   of   an increase   (or   decrease)   in   Seller’s   cost,   change   in   market   conditions,   prior   sale,   or   any other   causes   beyond   the   Seller’s   reasonable   control   and   upon   written   notification   to Buyer.   Unless   otherwise   noted   in   Order,   prices   shall   automatically   expire   in   thirty   (30) days from the date of same. 3. Taxes:   Unless   otherwise   agreed   to   in   writing   by   Seller,   all   prices   quoted   are exclusive   of   transportation   and   insurance   costs,   duties,   and   all   taxes   including   federal, state   and   local   sales,   excise   and   value   added,   goods   and   services   taxes,   and   any other   taxes.   Buyer   agrees   to   indemnify   and   hold   Seller   harmless   for   any   liability   for   tax in   connection   with   the   sale,   as   well   as   the   collection   or   withholding   thereof,   including penalties   and   interest   thereon.   When   applicable,   transportation   and   taxes   shall   appear as separate items on Seller’s invoice. 4. Payment:   Payment   may   be   made   by   check,   money   order,   or   bank   wire   (all   fees are   borne   by   the   Buyer).   Unless   Order   states   otherwise,   where   Seller   has   extended credit   to   Buyer,   terms   of   payment   require   20%   (of   Order   total)   in   advance   from   Buyer at   time   of   purchase   with   remaining   balance   of   Order   paid   by   Buyer   no   later   than   thirty (30)    days    from    date    of    the    Order’s    shipment    (or    completion    date    of    Service performed),   without   offset   or   deduction.   On   any   past   due   invoice,   Seller   may   impose interest   at   the   rate   of   one   and   one-half   percent   [1.5%]   per   month.      If   Buyer   fails   to make   payment   when   it   is   due,   Seller   reserves   the   right   to   interrupt   service,   change   or withdraw   credit   and   thereby   suspend   or   cancel   performance   under   any   or   all   purchase orders   or   agreements   in   which   Seller   has   extended   credit   to   Buyer   and   recover   in   its entirety,   all   Products   described   in   Order   delivered.      In   the   event   of   default   by   Buyer, Seller   shall   be   entitled   to   costs,   fees,   and   expenses,   including   but   not   limited   to recovery of attorney fees, court costs and fees, and collections costs. 5. Shipment,   Delivery, Acceptance   and Title:   Shipment   occurs   when   the   Product   is loaded   and   released   to   the   carrier   at   shipping   point.      The   Product’s   arrival   (or   any portion   thereof)   on-board   the   carrier   at   the   Buyer’s   ‘Ship   To’   address   described   in   the Order,   constitutes   Delivery.      Any   utilization   of   the   Product   by   the   Buyer   including,   but not    limited    to    powering    on,    setting    up,    installing    tooling,    and/or    programming, constitutes   Acceptance.   Title   and   risk   of   loss   pass   to   the   Buyer   upon   loading   and release   of   the   Product   to   the   carrier.      Deliveries   will   be   made   “FOB   USA   Shipping Point”   or   Free   On-Board   from   point   of   USA   based   shipment.      Seller’s   delivery   dates are   estimates   only   and   Seller   is   not   liable   for   delays   in   delivery   or   for   failure   to   perform due   to   causes   beyond   the   reasonable   control   of   the   Seller,   nor   shall   the   carrier   be deemed   an   agent   of   the   Seller.      Physical   delivery   of   any   line   item,   component,   or portion   of   the   order   constitutes   delivery   of   same   and   is   therefore   subject   to   payment terms   described   in   paragraph   4.      A   delayed   delivery   of   any   part   of   an   Order   does   not entitle   Buyer   to   withhold   payment   of   entire   order,   nor   does   it   entitle   buyer   to   cancel   the Order   or   any   portion   of   the   Order.      Buyer   may   elect   to   withhold   payment   on   any undelivered line item, component, or portion of the Order with Seller’s written consent. 6. Returns, Refunds and Exchanges: Returns: Only   products   originally   shipped   from   HMI   or   from   an   authorized   supplier   (drop-ship) will   be   considered   for   return   to   HMI.   By   a   Customer   requesting   return   of   products   to HMI,   the   Customer   certifies   that   the   products   were   purchased   from   HMI   and   there   has been   no   substitution   of   the   product   from   another   supplier,   distributor   or   other   source   of the   product.   Any   return   must   be   in   the   original   packaging   and   in   unused   condition except    if    approved    for    failure    analysis/warranty    evaluation    by    HMI    via    a    Return Material Authorization (RMA). Return Freight / Restocking Fee: HMI   reserves   the   right   to   charge   cancellation   and   restocking   fees,   at   a   minimum   rate of   15%   to   be   deducted   from   the   Customer   refund.   HMI   does   not   refund   the   original shipping   and   rigging   if   part   of   the   original   Order.      Customer   is   responsible   for   all   rigging and   return   freight   charges.   HMI   does   not   accept   COD   shipments.     Any   deposit   paid   to HMI by Buyer may be deemed non-refundable to Buyer. Refunds: Upon   receipt   and   inspection   of   returned   item(s),   HMI   will   advise   of   the   refund   status.   In the   case   of   factory   warranty   or   failure   analysis,   HMI   will   issue   any   applicable   credit pending    manufacturer    confirmation    of    failure.    HMI    initiates    credits    via    the    original method of payment within 48 hours of approval. 7. Limited   Warranty:   Final   commissioning   and   warranty   activation   of   the   Product requires   that   the   Machine   Installation   Record   (MIR)   be   submitted   and   accepted   by   the Seller   and/or   Seller’s   affiliates   to   obtain   a   Permanent   Operation   Code   (POC),   if   the Product    is    so    equipped.    The    Seller    and/or    Seller’s    affiliates    reserve    the    right    to withhold    POC    if    Payment    obligations    are    not    met,    which    may    render    Product temporarily inoperable.  Unless   otherwise   stated   in   Order   Seller   warrants   to   the   original   purchaser,   other   than   a purchaser   for   resale,   that   Seller’s   machine   tools   shall   be   free   of   defects   in   materials and   workmanship.   For   a   period   of   one   (1)   year   from   completion   of   installation,   or   for   a period   of   fifteen   (15)   months   from   date   of   shipment,   whichever   is   earlier.      Seller   will,   at its   sole   and   exclusive   discretion,   either   replace   or   repair   any   machine   or   part   thereof defective in workmanship or material, at no charge to the Purchaser. All   warranty   repairs   must   either   be   performed   by   or   authorized   by   a   Seller.      To   obtain warranty    service,    Purchaser    must    contact    the    Seller.        Purchaser    must    provide verification   of   the   date   of   delivery/installation   when   requesting   warranty   service   (dated installation   report,   MIR).      Ground   freight   charges   (UPS   regular   or   common   carrier truck)    for    all    warranty    replacement    parts    are    paid    by    Seller.        If    machine    is    not operational,   the   Seller   will   pay   next   -   day   air   shipment   charges   for   necessary   parts weighing   100   lbs.   or   less.   Materials   or   parts   alleged   to   be   defective   shall   be   returned   to Seller,   at   Seller’s   request,   transportation   charges   prepaid.     After   the   warranty   repair   or replacement   of   a   defective   part,   Seller   warranty   for   such   part   shall   continue   for   ninety (90) days or for the remainder of the original Limited Warranty, whichever is longer.  WARRANTY LIMITATIONS This   warranty   shall   remain   in   effect   only   if   the   machine   is   used   and   maintained   in accordance   with   all   operating   and   maintenance   instructions   set   forth   in   the   manuals and   instruction   sheets   furnished   by   the   Seller.      The   Seller   shall   have   no   liability   to initiate   or   continue   to   service   or   support   the   Product   if   the   Purchaser   has   not   fulfilled   its Payment   obligations   (see   Paragraph   #4).      Buyer   is   hereby   No   allowance   will   be   made for   repairs   or   alterations   made   without   Seller’s   prior   written   consent   or   approval.      The limited warranty provided by Seller excludes the following: 1. Damage,    malfunction,    or    failure    caused    by    or    resulting    from    improper maintenance,   misuse,   neglect,   accident   or   any   other   cause   beyond   the   control   of   the Seller. 2. Damage,    malfunction,    or    failure    caused    by    modification    of    the    machine (mechanical or electrical) Without written authorization by Seller. 3. Damage,   malfunction   or   failure   caused   by   installation   or   use   of   accessories   or peripherals not purchased through or authorized in writing by Seller. 4. Paint,   batteries,   filters,   fluids,   fuses,   light   bulbs,   or   any   commonly   expendable item. 5. Damage   to   machines   and/or   components   while   being   transported   from   Seller’s warehouse or facility to destination. 6. Accessories   or   peripherals   not   manufactured   by   Seller,   which   shall   be   subject only to whatever warranty that is supplied by the manufacturer of such product. 7. Fanuc   CNC   control,   Fanuc   spindle   motors   and   Fanuc   servo   motors,   spindle and servo drives, which are covered by a two (2) year manufacturer warranty. No   person,   agent,   distributor,   dealer   or   company   is   authorized   to   change,   modify   or amend   the   terms   of   this   Limited   Warranty   in   any   manner.   Seller   makes   no   warranties, guarantees   or   representations,   express   or   implied   with   respect   to   the   machine   tool,   or parts   thereof,   except   to   the   extent   such   warranty   is   set   forth   herein.   The   equipment covered   does   not   necessarily   comply   with   any   codes   or   standards   unless   specifically quoted, ordered, and so accepted. THIS    WARRANTY    IS    IN    LIEU    OF    ALL    OTHER    WARRANTIES,    EXPRESS    OR IMPLIED,         INCLUDING         WITHOUT         LIMITATION         WARRANTIES         OF MERCHANTABILITY    OR    FITNESS    FOR    ANY    USE    OR    PURPOSE.        HWMA’s LIABILITY   UNDER   THIS   WARRANTY   IS   EXPRESSLY   LIMITED   TO   ITS   PROMISE TO   REPAIR   OR   REPLACE   THE   DEFECTIVE   GOODS.   HWMA   SHALL   HAVE   NO FURTHER LIABILITY IN CONTRACT OR NEGLIGENCE 8. Limitation   of   Liabilities:   BUYER   SHALL   NOT   BE   ENTITLED   TO,   AND   SELLER SHALL   NOT   BE   LIABLE   FOR,   LOSS   OF   PROFITS   OR   REVENUE,   PROMOTIONAL OR    MANUFACTURING    EXPENSES,    OVERHEADS,    BUSINESS    INTERRUPTION COST,    LOSS    OF    DATA,    REMOVAL    OR    REINSTALLATION    COSTS,    INJURY    TO REPUTATION   OR   LOSS   OF   BUYERS,   PUNITIVE   DAMAGES,   IPR   INFRINGEMENT, LOSS   OF   CONTRACTS   OR   ORDERS   OR   ANY   INDIRECT,   SPECIAL,   INCIDENTAL OR   CONSEQUENTIAL   DAMAGES   OF   ANY   NATURE.   BUYER’S   RECOVERY   FROM SELLER   FOR ANY   CLAIM   SHALL   NOT   EXCEED THE   PURCHASE   PRICE   PAID   FOR THE   AFFECTED   PRODUCTS   IRRESPECTIVE   OF   THE   NATURE   OF   THE   CLAIM WHETHER   IN   CONTRACT,   TORT,   WARRANTY,   OR   OTHERWISE.   BUYER   WILL INDEMNIFY,    DEFEND    AND    HOLD    SELLER    HARMLESS    FROM    ANY    CLAIMS BASED      ON      (a)      SELLER’S      COMPLIANCE      WITH      BUYER’S      DESIGNS, SPECIFICATIONS,   OR   INSTRUCTIONS,   (b)   MODIFICATION   OF   ANY   PRODUCTS BY   ANYONE   OTHER   THAN   SELLER,   or   (c)   USE   IN   COMBINATION   WITH   OTHER PRODUCTS. 9. Export   Control:   Buyer   certifies   that   it   will   be   the   recipient   of   the   Products   to   be delivered   by   Seller.   Buyer   understands   that   the   associated   hardware,   software,   and/or technical data (“products”)   listed   on   their   Purchase   Order   includes   items   that   are   governed   by   the U.S.   Export   Administration   Regulations   (“EAR”),   by   the   U.S.   Foreign   Assets   Control Regulations   (“OFAC”)   and   the   International   Traffic   in   Arms   Regulations   (“ITAR”).   The Buyer   understands   that   its   sale   or   distribution   of   said   products   may   constitute   exports or   re-exports,   and   as   such,   must   be   in   accordance   with   the   requirements   administered by   Bureau   of   Industry   and   Security,   Department   of   Treasury,   and   Department   of   State. It   is   understood   that   the   country   of   ultimate   destination,   commodity   classification,   end- user,    or    end-use    for    any    said    products,    could    affect    the    applicable    license requirements   and   exportability.   The   Buyer   agrees   to   consult   various   resources,   such as   the   EAR,   ITAR,   and   OFAC,   by   the   U.S.   Department   of   Commerce’s   Bureau   of Industry    and    Security’s    (“BIS”)    Export    Counseling    Division,    and    other    appropriate Government   Sources   to   ensure   that   the   sales   and   distribution   of   said   products,   is processed   in   accordance   with   all   applicable   laws.   The   Seller   will   not   transfer   any export-controlled   products   to   a   “non-U.S.   Person”   without   the   proper   authority   of   the United States Government, and the buyer’s written approval. 10. Use   of   Products:   Unless   otherwise   noted,   Products   sold   by   Seller   are   not designed,   intended   or   authorized   for   use   in   life   support,   life   sustaining,   nuclear,   or other   applications   in   which   the   failure   of   such   Products   could   reasonably   be   expected to   result   in   personal   injury,   loss   of   life   or   catastrophic   property   damage.   If   Buyer   uses or   sells   the   Products   for   use   in   any   such   applications:   (1)   Buyer   acknowledges   that such    use    or    sale    is    at    Buyer’s    sole    risk;    (2)    Buyer    agrees    that    Seller    and    the manufacturer   of   the   Products   are   not   liable,   in   whole   or   in      part,      for   any   claim   or damage   arising   from   such      use;      and      (3)      Buyer   agrees   to   indemnify,   defend   and   hold Seller   and   the   manufacturer   of   the   Products   harmless   from   and   against   any   and   all claims,   damages,   losses,   costs,   expenses   and   liabilities   arising   out   of   or   in   connection with such use or sale. 11. Force   Majeure:   Seller   is   not   liable   for   failure   to   fulfill   its   obligations   for   any accepted   Order   or   for   delays   in   delivery   due   to   causes   beyond   Seller’s   reasonable control   including,   but   not   limited   to,   acts   of   God,   natural   or   artificial   disaster,   riot,   war, strike,   delay   by   carrier,   shortage   of   Product,   acts   or   omissions   of   other   parties,   acts   or omissions   of   civil   or   military   authority,   Government   priorities,   changes   in   law,   material shortages,   fire,   strikes,   floods,   epidemics,   quarantine   restrictions,   acts   of   terrorism, delays   in   transportation   or   inability   to   obtain   labor,   materials   or   Products   through   its regular   sources,   which   shall   be   considered   as   an   event   of   force   majeure   excusing Seller   from   performance   and   barring   remedies   for   non-performance.   In      an   event   of force   majeure   condition,   the   Seller’s   time   for   performance   shall   be   extended   for   a period   equal   to   the   time   lost   as   a   consequence   of   the   force   majeure   condition   without subjecting    Seller    to    any    liability    or    penalty.    Seller    may,    at    its    option,    cancel    the remaining    performance,    without    any    liability    or    penalty,    by    giving    notice    of    such cancellation to the Buyer. 12. Technical   Assistance   or   Advice:   If   technical   assistance   or   advice   is   offered   or given   to   Buyer   free   of   charge,   Seller   shall   not   be   held   liable   for   the   content   or   Buyer’s use   of   such   technical   assistance   or   advice   nor   shall   any   statement   made   by   any   of Seller’s    representatives    in    connection    with    the    Products    or    Services    constitute    a representation or warranty, express or implied. 13. General:    (a)    The    laws    of    the    State    to    where    the    Product    is    shipped    and installed,   will   exclusively   govern   any   dispute   between   Seller   and   Buyer,   (b)   Buyer   may not   assign   this   Agreement   without   the   prior   written   consent   of   Seller.   Seller   or   its affiliates   may   perform   the   obligations   under   this Agreement.   This Agreement   is   binding on    successor    and    assigns,    (c)    Products,    including    software    or    other    intellectual property,    are    subject    to    any    applicable    rights    of    third    parties,    such    as    patents, copyrights and/or user licenses.